Preparation Before Use Of The Washing Machine

- Jul 02, 2019-

a. Check the pipeline system for leaks and leaks. If this is the case, notify the maintenance personnel to repair it.

b. Check if the cleaning solution is sufficient. If it is not enough, increase the cleaning solution in time.

c. First test the vehicle, then run for 2-3 minutes, check whether the transmission system (motor, coupling, reducer) and the belt are moving smoothly, and confirm that everything is normal before production.

d. Open the oil slick removal device (except for the slick oil removal device) to start the oil slick removal. Therefore, the water pump is still open, the water surface is calm, and the oil discharge effect is best. After the oil slick is basically removed, the oil removal is stopped. Use the lunch break.