Sweeper machine tire wear is mainly caused by the friction problem generated during the sliding process between the tire and the ground. Abnormal tire wear can be directly observed and understood with the naked eye. First, let's take a look at the reasons for the wear of the machine tire.
Check the wear condition:
1. Early wear and tear of core components: Excessive tire air volume, such as wide tires for narrow wheels, will also cause wear.
2. Excessive wear on both sides: If the tire is not inflated enough, or through long-term overloaded driving, the contact area between the tire and the ground will continue to increase, so the wear will accelerate.
3. Tread wear jagged: This is a position shift caused by improper positioning of the front wheel suspension system. The tires will wear jaggedly when sliding between the wheels in normal rolling or the continuous changes in wheel positioning technology during driving.
4. Alopecia wear occurs: During the driving of the sweeper, due to the unbalance of the wheels being rotated at a high speed, the various components are accelerated to different degrees, and the performance and quality of the steering wheel operating system will deteriorate. If the vehicle is found to be in a specific speed direction during driving If there is a slight jitter, a dynamic balance test should be carried out to eliminate this phenomenon and prevent tire spots from wearing.
Riding sweeper machine
Drive correctly to effectively reduce tire wear:
(1) In order to reduce tire wear, the correct way is to drive the traffic and start the car slowly, thereby avoiding the drag of the tire and the ground to accelerate the tread wear.
(2) The person on the sweeper must use first gear or second gear. Do not start off on a springboard to prevent gnawing and damage to the tires, and avoid sliding of tires and tread damage.
(3) The correct method of driving when the sweeper goes downhill is to control the appropriate speed according to the size, length and road usage of different slopes. At the same time, pay attention to keep a safe distance of more than 50 meters from the front sweeper, and drive on the right side.. By using downhill low gears, uphill especially, by avoiding intermediate stations stretching.
(4) During the turning process, the sweeper should operate according to the company's curve road conditions, turning radius, driving organization density and vehicle speed. Generally speaking, slow down appropriately, not high-speed cornering.
(5) The correct method of driving on uneven roads is to reduce the collision between Chinese tires and roads by choosing different roads to avoid damage to the parts and tires, and to slow down and avoid Tire bumps and strong vibrations occur.
(6) Driving under complicated conditions, reducing frequent braking and avoiding emergency braking, thereby reducing tire wear, through slippery roads, the right drive wheel drive method, the top tire chain. If there is no chain, rope lashing technology can also be used instead. Driving on this road, and the correct driving method points out that emergency braking should be avoided with the foot brake, and the brake is not used as the hand brake. If you need to brake with your feet, use a spot brake to reduce the design speed.