Nowadays, sweepers are indispensable cleaning tools in factories, enterprises, and street properties. With sweepers, workers can work more flexibly and double their work efficiency. But in the process of using, sometimes it is found that the sweeper is not clean. Now let's briefly talk about possible problems and solutions.
1. Check whether the main brush is working: A: If it does not work, please check the insurance and overload protection of the main brush. B: If it works, please check the wear of the main brush. During the working process, the bristles of the main brush will wear out, which will affect the cleaning effect. During the inspection, you can put the main brush on the ground and observe the contact between the bristles and the ground. It is better to bend slightly. If the bristles are not in contact with the ground, adjust the main brush downwards at this time. C: If the main brush is entangled with garbage, it may cause the main brush to fail to work normally, or it may burn out the main brush motor, which needs to be cleaned up in time.
2. Check whether the dust box is full of dust: When the site is too dirty and there is a lot of dust, the dust box is easy to fill up quickly, and the garbage can not be swept into the dust box, and the cleaning effect is not good. Therefore, the dust should be cleaned up in time during the work. box.
3. Slow cleaning: When driving the sweeper to work, it is recommended to clean as slowly as possible. Too fast will also lead to unclean cleaning and easy dusting.
4. The degree of side brush wear: If the side brush is severely worn, it will not be able to gather dust and will not clean. The side brush is a vulnerable part and should be adjusted, replaced and maintained frequently and in time.
5. Integrity of the dust cover: The dust cover of the sweeper is around the main brush. If the dust cover is broken or worn severely, it will cause dust leakage. At this time, the dust cover needs to be replaced. It is best to keep the height of the dust-proof skin about 3-5 mm above the ground.
6. The inevitable common problem: the dust leakage of sweeper turning is almost a common problem in the industry. The reason is that the equipment is turning, especially when turning sharp, the angle between the dust barriers will form, resulting in dust leakage. Therefore, it is recommended that when using the equipment to sweep the floor, try to turn as far as possible and sweep more times.
7. Site factors: different sites have different cleaning effects, so it is also very important to choose the right machine for different sites. The flat surface is much easier to clean than the bumpy road.