In the process of using the floor scrubber, it is necessary to choose a suitable operation method to achieve good results. Its advantages are increasing during the use. Let's learn about the common accessories of the floor scrubber.
Common accessories for floor scrubbers include scrubber brushes, scouring pads, batteries, chargers, absorbent strips, solenoid valves, and so on. The main function of the scrubber absorbent strip is to cooperate with the suction motor to collect and absorb the sewage and detergent left on the ground after cleaning by the front brush. After using for a period of time, the rubber strip will wear out due to friction, which will affect the water absorption effect, so please check the condition of the rubber strip frequently. Use the squeegee lifting handle to lower the squeegee, loosen the two fixed handles to remove the squeegee from the bracket, remove the suction tube from the squeegee, loosen the fixing buckle, take out the fixing bracket, and take out the rubber strip of the floor scrubber. The adhesive strip is used repeatedly on all four sides. If you have used all four sides, replace the adhesive strip with a new one, reinstall the fixing bracket, and fasten the fixing buckle.
The solenoid valve of the floor scrubber is a washable solenoid valve, and the solenoid valve is checked and cleaned every 100 working hours. When cleaning the electric bottle of the floor, it is forbidden to over-discharge the battery, which will cause permanent damage to the battery. Carry out the charger and make sure that the emergency stop switch has been pressed. Before you stop using the floor scrubber for a long time, please fully charge the floor scrubber motor bottle and then store it. During storage, you need to charge it at least once every month to prevent battery damage. In order to prevent damage to the ground from abrasion, please avoid using the brush when the machine is not moving. Check the wear level of the brushes every 100 hours during the use of the machine. Scouring pads of different sizes are suitable for different types of floor scrubbers. Scouring pads can also be used for cleaning, waxing, polishing, and maintenance. Black has the greatest friction and is suitable for dirty ground. White is softer and used for regular floor cleaning. Red is between black and white.