How to clean epoxy floor properly with hand propelled floor scrubber?

- Aug 10, 2020-

How to clean epoxy floor properly with hand propelled floor scrubber?

Nowadays, as a common equipment in the field of cleaning and environmental protection, more and more users choose to use it to complete efficient and rapid cleaning work. Especially the hand push type washing machine, its convenient and simple operation, more favored by users. Especially for the factory cement floor, epoxy floor and other floor cleaning, the effect is more significant. So how to operate the hand push type when cleaning the welcome floor?

1. Clean up the rubbish

The epoxy floor should be cleaned once, especially the large garbage, which will affect the cleaning effect, so it needs to be cleaned in time.

2. Water injection

According to the cleaning area, the right amount of clean water should be injected into the cleaning tank of the washing machine, and appropriate amount of industrial low foam detergent should be added according to the degree of oil contamination on the ground.

3. Turn on the switch

Put down the brush plate, turn on the key, turn on the brush plate and water absorption switch, and adjust the water volume properly.

4. Uniform cleaning

At this time, the floor washer can be pushed to clean the epoxy floor at a constant speed.

5. Turn off the switch

After the work is finished, turn off the brush disc switch, lift it up, turn off the water suction switch, and then turn off the key switch.

6. Flush with water

Push the floor washer to a safe place, drain the sewage, drain the clean water and wash it.

7. Dry and place

Dry the floor washer and place it in a dry and ventilated place.


For many years, as a professional cleaning equipment manufacturer and supplier, we can provide sweepers, floor scrubber, carpet sweepers, snow sweepers and other products, if you need, you can contact us at any time! We will provide you with professional services. My information is: Whatsapp/Wechat: +8615903873562     Email: